IDENTIFIKASI KESELAMATAN PENANGANAN LIMBAH PELUMAS PADA PT.ALTRAK 1978 BALIKPAPAN

Veza Azteria(1*), Jamal Efendi(2),


(1) Universitas Balikpapan
(2) Universitas Balikpapan
(*) Corresponding Author

Abstract


One of the B3 waste that needs to get special handling because it is produced in high amount in the society is the oil used oil (used oil). Used lubricating oil is produced from various human activities such as, industry, mining, and workshop. The purpose of this research is to know how to identify the handling safety of lubricant waste at PT.ALTRAK 1978 Balikpapan and to determine the proper controlling step. This research is designed as an observational descriptive evaluation research conducted by checklist, JSA (Job Safety Analysis) with observation, analyze , Observation and processing of data and information that has been collected systematically. The results showed that the handling of lubricant waste in PT.ALTRAK 1978 Balikpapan get the results of the value by using a percentage calculation of 72% if adjusted to the operational standard of the procedure is included in the assessment with enough results.Identifikasi safety handling lubricant waste in PT.ALTRAK 1978 Balikpapan can be done By making JSA (Job Safety Analysis) as well as adjustment to standard operational procedures with the implementation of the field.

Keywords


lubricant waste, B3 waste, environment

Full Text:

PDF

References


Kementerian Lingkungan Hidup RI. (2002). Himpunan Peraturan Perundang-undangan Dibidang Pengelolaan Lingkungan Hidup dan Pengendalian Dampak Lingkungan Era Otonomi Daerah. Jakarta : Kemlinghup.

Keputusan Kepala Badan Pengendalian Dampak Lingkungan 68/Bapedal/05/1995. (1995). Tentang Tata cara memperoleh izin penyimpanan, pengumpulan, pengoperasian alat pengolahan, pengolahan dan penimbunan akhir limbah B3.

Keputusan Kepala Badan Pengendalian Dampak Lingkungan Nomor 255 Tahun 1996. (1996). Mengenai Tata Cara dan Persyaratan Penyimpanan dan Pengumpulan Minyak Pelumas Bekas.

Keputusan kepala Badan Pengendalian Dapak Lingkungan Nomor 05/Bapedal/09/1995. (1995). Tentang Simbol dan Label Limbah B3.

Kusuma Angga Rosana. (2011). Sistem Pengumpulan dan Penyimpanan Minyak Pelumas Bekas Sebagai Limbah Bahan Berbahaya dan Beracun (B3) di PT. INKA (Persero)Madiun.Surakarta:Universitas Sebelas maret.

Peraturan Pemerintah No 85 Tahun 1999 (1999). Tentang Perubahan Atas Peraturan Pemerintah No 18 Tahun 1999.Tentang Pengelolaan Limbah Bahan Berbahaya Dan Beracun.

Ray Cesar, Ratman. (2012). Penerapan Pengelolaan Limbah B3 di PT. Toyota Motor Manufacturing Indonesia. Semarang : Universitas Diponegoro

Stisya, Iadha. (2010). Pengelolaan B3 (Tl-3204) Evaluasi Pengelolaan Oli Bekas Sebagai Limbah B3. Bandung: Institut Teknologi Bandung.

Sugeng Budiono, R.M.S. Jusuf, Adriana Pusparini. (2003). Bunga Rampai Hiperkes dan KK Semarang : Badan Penerbit Universitas Diponegoro.

Sugiyono. (2014). Metode Penelitian Kuantitatif Kualitatid dan R&D.Jakarta:Alfabeta

Susilo, Agus. (2010). Implementasi Identifikasi Bahaya dan Penilaian Risiko Pada Proses Pengoperasian Mesin Cut Off di Departemen Coupling PT. Seamless Pipe Indonesia Jaya Cilegon-Banten. Laporan Khusus. Faklutas Kedokteran Universitas Sebelas Maret. Surakarta.

Suma’mur P.K. (2009). Keselamatan dan Pencegahan Kecelakaan. Jakarta : CV. Gunung Agung.

Tarwaka,. (2010). Manajemen dan Imlementasi K3 Di TempatKerja. Surakarta: Harapan Press.




DOI: http://dx.doi.org/10.31289/biolink.v4i1.964

Article Metrics

Abstract view : 300 times
PDF - 76 times

Refbacks

  • There are currently no refbacks.


BIOLINK: JURNAL BIOLOGI LINGKUNGAN,INDUSTRI, KESEHATAN
Program Studi Biologi, Fakultas Biologi, Universitas Medan Area
Universitas Medan Area, Jalan Kolam No. 1, Pasar V, Medan Estate, Sumatera Utara http://ojs.uma.ac.id/index.php/biolink dan Email: biolink@uma.ac.id
Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License