Analisis Risiko Keselamatan dan Kesehatan Kerja Menggunakan Metode Hirarc pada Proses Perbaikan Kapal Tugboat (Studi Kasus PT Marga Surya Shipindo, Samarinda)

Willy Tambunan(1*),


(1) Universitas Mulawarman
(*) Corresponding Author

Abstract


Health and safety has been known as one of the requirements in carrying out tasks and a form of human rights factor for workers in carrying out work activities. Lack of awareness and concern for K3 resulted in the existence of work risks, namely the presence of accidents that occur in welding activities carried out on the maintenance of tugboats carried by PT. Margasurya Shipindo like being hit by welding sparks, slipping, touched by hot iron which causes injury to workers. Therefore the purpose of this study is to identify and classify potential hazards, and control risks in work activities at PT. Marga Suryashipindo. Hazard analysis of risk in this study used the Hazard Identification, Risk Assessment, and Risk Control (HIRARC) method. Based on the results of observations and interviews with 3 maitenance workers and 1 maintenance coordinator, there were 22 potential hazards. Based on the risk assessment, the risk level values were not with the HIGH category, 10 risks were MEDIUM category and 12 risk were LOW category. Control of the above risks is to use APD with the standards of welding workers, carry out administrative controls in the form of the application of SOP welding and K3 supervision to evaluate work activities. In addition, Engineering control is also carried out in the form of holding lift aids and doing maintenance on a regular basis, procuring toolsbox, and arranging tools and materials in the welding location.


Keywords


Health and Safety (K3), Hazard Identification, Risk, Risk Assessment, and Risk Control (HIRARC)

Full Text:

PDF1

References


Anwar, F.,N, Farida. I dkk, 2014, Analisis Manajemen Risiko Kesehatan dan Keselamatan Kerja (K3) pada Pekerjaan Upper Structure Gedung Bertingkat, vol. 13, No. 1

Baharudin., Zulkifly. A., Rantetasak. B., 2009, Analisa Perawatan Berbasis Keandalan Sistem Distribusi Minyak Lumas Mesin Utama KMP Bontoharu, Jurnal Penelitian Enjiniring, Vol 12, No 2

Departement of Occupational Safety and Health Ministry of Human Resources, 2008, Guidelines for Hazard Identification, Risk Assesment and Risk Control (HIRARC). Malaysia

Ihsan. T., Edwin, T., Irawan, R., o, 2016, Analisis Risiko K3 dengan Metode Hirarc Pada Area Produksi PT. Cahaya Murni Andalas Permai, Universitas Andalas, Sumatra Barat

Kuswana. S., 2014, Ergonomi dan K3, Rosda Karya, Bandung

Kementrian Penyadagunaan Aparatur Negara Dan Reformasi Birokrasi Republik Indonesia, 2012, Pedoman Penyusunan Standar Operasional Prosedur Administrasi Pemerintahan. Indonesia

Pamungkas. W., 2015, Teknik Sampling Statistika Teknik Informatika, UNS, Surakarta

Roehan, A., Yuniar., Desrianty. A., 2014, Usulan Perbaikan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) Menggunakan metode HIRA, Jurnal Teknik Industri Itenas, vol.02, No 02

Socrates. M., F., 2013, Analisis Tingkat Risiko Keselamtan Kerja dengan Metode HIRARC Pada Alat Suspension Preheater PT Indocement Prakasa, Universitas Islam Negri Syarif Hidayatullah, Jakarta

Sucita, I.,K, Broto, A.,B, 2011, Identifikasi dan Penanganan Risiko K3 pada Proyek Kontruksi Gedung, vol. 10, No. 1

Triwibowo. C., Pusphandani, M., E, 2013, Kesehatan Lingkungan dan K3, Nuha Medika, Yogyakarta

Wijaya. A. Togar. P., Palit. H. C., 2015, Evaluasi Kesehatan dan Keselamatan Kerja dengan metode HIRARC pada PT. Charoen Pokphand Indonesia, Jurnal Tirta, Vol 3, No 1




DOI: http://dx.doi.org/10.31289/jime.v3i1.2525

Article Metrics

Abstract view : 0 times
PDF1 - 0 times

Refbacks

  • There are currently no refbacks.


Program Studi Teknik Indusri, Fakultas Teknik, Universitas Medan Area
Universitas Medan Area, Jalan Kolam No. 1, Pasar V, Medan Estate, Sumatera Utara http://ojs.uma.ac.id/index.php/jimedan Email: jime@uma.ac.id
Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License