Design of Smart Trash Can Using Fuzzy Logic Algorithm Based on Arduino

Fadhillah Azmi(1*), William William(2), Kevin Kristanto Salim(3), Tommy Tiara Hartanto(4), Felix Tham(5),


(1) Universitas Prima Indonesia
(2) 
(3) 
(4) 
(5) 
(*) Corresponding Author

Abstract


Smart trash cans use a proximity sensor (ultrasonic) to detect the height of the trash, the PIR (Passive Infra Red) sensor to detect human presence and Arduino as the data processing center. This trash can also has an LED that functions as an indicator and the buzzer functions as an alarm when the trash can is full. If the garbage reaches half of the trash, the LED will turn yellow, if the garbage reaches a height of 4cm from the trash lid, then the LED will turn red and so the trash can will be locked even though the PIR sensor detects humans. Buzzer will live to attract the attention of cleaning officers to dispose of trash. To dispose of garbage, the clerk needs to shift the open and close trash button so that the lid will open. The author hopes that this smart trash can can increase public awareness to dispose of garbage in its place. The results of study show that PIR sensors work by well in detecting the presence of humans and ultrasonic sensors in detecting the height of garbage are not accurate, so that if the trash if the trash can is empty, sometimes the garbage is minus, whereasif the garbage is < 3.5 cm, the sensor fails detect it.

Keywords


Smart trash can; Fuzzy logic; Arduino

Full Text:

PDF

References


Antoni, Rizki. (2015). ANALISIS DAN IMPLEMENTASI SISTEM SENSOR PADA TEMPAT SAMPAH OTOMATIS DENGAN METODE FUZZY BERBASIS MIKROKONTROLLER, Proceedings of Engineering.

Hidayat, Cepi Rahmat & Syahrini, Faizal Dwi. (2017). PERANCANGAN SISTEM KONTROL ARDUINO PADA TEMPAT SAMPAH MENGGUNAKAN SENSOR PIR DAN SENSOR ULTRASONIK. Jurnal Voice of Informatics. Vol 6.

Faisal. (2017). APLIKASI SMART TRASH CAN DALAM MENGATASI PERSOALAN SAMPAH SECARA MOBILE BERBASIS ANDROID. Jurnal Informatika Sains dan Teknologi (INSTEK). Vol 2: 1 – 10.

Ginting, E S P. (2016). PERANCANGAN ROBOT PEMINDAH BARANG BERBASIS MIKROKONTROLER ATMEGA8535 DENGAN KENDALI SMARTPHONE ANDROID. Skripsi. Universitas Sumatera Utara

Setiawan, Dedi. (2014). RANCANG BANGUN ALAT PEMBUKA DAN PENUTUP TONG SAMPAH OTOMATIS BERBASIS MIKROKONTROLER. Jurnal Teknologi dan Sistem Informasi.

Simbolon, R I. (2018). RANCANG BANGUN TAGANING ELEKTRIK MENGGUNAKAN SENSOR PIEZOELEKTRIK DENGAN ALGORITMA FUZZY LOGIC BERBASIS ARDUINO MEGA. Skripsi. Universitas Sumatera Utara.

Sukarjadi. (2017). PERANCANGAN DAN PEMBUATAN SMART TRASH BIN BERBASIS ARDUINO UNO DI UNIVERSITAS MAARIF HASYIM LATIF. Engineering and Sains Journal.

Tholib, Rifqi. (2017). AUTOMATIC WARNING SYSTEM SMART TRASH (AWASSH) BERBASIS ARDUINO NANO. Jurnal Prodi Teknik Elektronika dan Informatika Edisi Proyek Akhir D3. Yogyakarta.




DOI: http://dx.doi.org/10.31289/jite.v3i1.2670

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.