Pengaruh Penambahan MasterGlenium ACE® 8595 dengan Pengurangan Kadar Air 37.5% dan Kadar Semen Rencana 409.80 kg/m3 Terhadap Kuat Tekan Beton


Andre Novan(1), Ermiyati Ermiyati(2), Yenita Morena(3), Ella Silvana Chebelita(4),


(1) Universitas Riau
(2) Universitas Riau
(3) Universitas Riau
(4) Universitas Riau

Abstract


MasterGlenium ACE® 8595 is a Type F chemical that serves to reduce the amount of mixing water, improve workability and improve concrete quality. The purpose of this study was to find out the effect of adding MasterGlenium ACE® 8595 with a reduction in water content of 37.5% and a plan cement level of 409.80 kg / m2. The research was conducted in the laboratory using the DOE (Department of Environment) method in accordance with SNI 03-2834-2000 with a test object in the form of a concrete cylinder diameter of 150 mm and a height of 300 mm. MasterGlenium ACE® 8595 tested on concrete age 7 days 3 sample, and 28 days 5 sample. Variations in the dose of addition of MasterGlenium ACE® 8595 used 0.54%, 0.81%, 1.08%, 1.35%, 1.62%, 1.89% and 2.16% of cement weight. The test results of a strong concrete press normal at 28 days amounted to 29.77 MPa.  The test results of a strong concrete press normal at 28 days amounted to 29.77 MPa.  The results of the test are strong concrete press with the addition of MasterGlenium ACE® 8595 amounting to 51.61 MPa, 53.53 MPa, 45.95 MPa, 49.80 MPa, 41.25 MPa, 40.80 MPa, and 39.27 MPa. Based on the results of the test, the use of MasterGlenium ACE® 8595 in concrete will increase the strength of the press, workability, and age coefficient.


Keywords


Superplasticizer, MasterGlenium ACE® 8595, Workability, Strong Press.

Full Text:

PDF

References


Antoni dan Paul Nugraha. (2007).Teknologi Beton. C.V Andi Offset. Yogyakarta.

Badan Standar Nasional. (1990). SNI-03-1974-1990: Metode Pengujian Kuat Tekan Beton. Jakarta.

Badan Standarisasi Nasional. (2011). SNI 03-2493-2011: Tata Cara Pembuatan Dan Perawatan Beton Benda Uji Di Laboratorium. BSN. Jakarta.

Badan Standar Nasional. (2004). SNI 15-7064-2004: Semen Portland Komposit. Jakarta.

Badan Standarisasi Nasional. (2000). SNI 03-6468-2000: Tata Cara Perencanaan Campuran Tinggi dengan Semen Portland dengan Abu Terbang. BSN. Jakarta.

Brook, K. M. dan Murdock, L. J. (1994). Bahan dan Praktek Beton. Erlangga, Jakarta.

Departemen Permukiman dan Prasarana Wilaya. (2004). Pd T-04-2004-C. Tata Cara Pembuatan dan Pelaksanaan Beton Berkekuatan Tinggi. Bandung. Departemen Permukiman dan Prasarana Wilayah.

Mulyono, Tri (2004). Teknologi Beton. Andi. Yogyakarta.

Samekto, Wuryati dan Rahmadiyanto, Candra. (2001). Teknologi Beton. Kanisius. Yogyakarta.

Standar Nasional Indonesia, (2008). SNI–1972-2008: Cara Uji Slump Beton. Badan Standarisasi




DOI: https://doi.org/10.31289/jcebt.v6i1.6786

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


Program Studi Teknik Sipil, Fakultas Teknik, Universitas Medan Area
Universitas Medan Area, Jalan Kolam No. 1, Pasar V, Medan Estate, Sumatera Utara http://ojs.uma.ac.id/index.php/jcebt dan Email: jcebt@uma.ac.id
Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License