Temperature Control System for Heating-Holding Heater Based Arduino With Monitoring Via Webserver


Golfrid Gultom(1*), Abdul Azis Rahmansyah(2), Dejoi Situngkir(3), Manan Ginting(4),


(1) Kampus Politeknik Teknologi Kimia Industri Medan Jl. Medan Tenggara VII Medan 20228
(2) Politeknik Teknologi Kimia Industri Medan
(3) Politeknik Teknologi Kimia Industri Medan
(4) Politeknik Teknologi Kimia Industri Medan
(*) Corresponding Author

Abstract


Heat and hold method is a method with temperature containment techniques in accordance with desired temperature and time functions. This technique aims in adjusting the characteristics of microbial resistance to temperature and saving energy consumption. In this study, a tank with temperature control system was designed for heat and hold the temperature according to the system requirements. Control of the temperature in the heating tank can be done based on the Arduino microcontroller. Arduino reads data from the temperature sensor and activate the heater according to temperature set on the Arduino. Arduino Ethernet Shield acts as Arduino data communication with a database connected to the internet network. The results of this study are in the form of a prototype that shows an IoT-based temperature monitoring tool that can be accessed anywhere via Web-based monitoring system interface. The test was carried out in 2 stages, namely testing by determining target of heater and testing with Holding and Heating with a delay of 10 minutes and 20 minutes. The heating tank temperature control system maintain a temperature of 40oC, 50oC, 60oC for 10 minutes. The temperature holding condition at a certain time is called holding. Henceforth the system temperature is at 70oC.

Keywords


Holding, Heating, Arduino, IoT

Full Text:

PDF

References


Zulfadli, T. (2018). Kajian Sistem Pengolahan Minyak Kelapa Murni (Virgin Coconut Oil) dengan Metode Pemanasan. Int. J. Nat. Sci. Eng. 2 (1): 34–41.

Saputro, E. J. W. (2016). Aplikasi Saklar Otomatis Untuk Pengendali Suhu Air Berbasis Mikrokontroler, Skripsi Thesis. Sanata Dharma University.

Palka, H. S. and Yusfi, M. (2016). Sistem Kontrol Temperatur Air pada Proses Pemanasan dan Pendinginan dengan Pompa sebagai Pengoptimal. J. Fis. Unand. 5(3): 222–227.

Gultom, G. Ginting, M. Irwansyah. Rahmansyah, A. A. Situngkir, D. (2019). Implementasi Pengiriman Data Sensor Suhu Ke Database Pada Sistem Heating-Holding Pemanas Bertingkat Untuk VCO. Regional Development Industry & Health Science, Technology and Art of Life. 2 (1): 167-172

Muttaqin, A. & Taufiq, I. (2012). Perancangan Sistem Pewaktuan Dan Pengontrolan Temperatur Pada Aplikasi Kamar Temperatur Dengan Sensor Lm35Dz Berbasis Mikrokontroler At89S52. J. Ilmu Fis. | Univ. Andalas. 4 (2): 67–75.

Arasada, B. & Suprianto, B. (2017). Aplikasi Sensor Ultrasonik Untuk Deteksi Posisi Jarak Pada Ruang Menggunakan Arduino Uno Aplikasi Sensor Ultrasonik Untuk Deteksi Posisi Jarak Pada Ruang Menggunakan Arduino Uno Bakhtiyar Arasada Bambang Suprianto,” J. Tek. Elektro. 6(2):137–145.

Usman, U. Muhammad, U. & Wibowo, N. R. (2018). Rancang Bangun Pyranometer Berbasis Mikrokontroler. Patria Artha Technol. J. 2 (2): 139–144.

Manual, U. (2014). Manual MAX6675 K-Type Thermocouple Temperature Sensor MAX6675 K-Type Thermocouple Temperature Sensor User Manual Manual MAX6675 K-Type Thermocouple Temperature Sensor. Indo Ware.




DOI: https://doi.org/10.31289/jite.v5i1.5253

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Program Studi Teknik Informatika, Fakultas Teknik, Universitas Medan Area
Universitas Medan Area, Jalan Kolam No. 1, Pasar V, Medan Estate, Sumatera Utara http://ojs.uma.ac.id/index.php/jite dan Email: jite@uma.ac.id
Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License